| Cooling |
|
|---|---|
| Tolerance | e8 |
| Coating |
| Steel | ||
| < 850 N/mm | < 1100 N/mm | < 1400 N/mm |
| 60 | 40 | 30 |
| Hardened steel | |||
| < 55 HRC | < 60 HRC | < 67 HRC | < 70 HRC |
| Stainless steel (VA) |
| 45 |
| Castings |
| 60 |
| Non-ferrous materials | |||
| Al | Copper | Mg | Plastics |
| 140 | |||
| Inconel |
| Abrasive material | |
| CFRP / GFRP | Graphite |
| Titanium |
|
K201182
|
D1
|
L2
|
L1
|
D2
|
z
|
|
|
|---|---|---|---|---|---|---|---|
| 1 | 1.0 | 4.0 | 58.0 | 6.0 | 3 | 30 | configurator |
| 1,5 | 1.5 | 6.0 | 58.0 | 6.0 | 3 | 30 | configurator |
| 2 | 2.0 | 7.0 | 58.0 | 6.0 | 3 | 30 | configurator |
| 3 | 3.0 | 10.0 | 58.0 | 6.0 | 3 | 30 | configurator |
| 4 | 4.0 | 13.0 | 58.0 | 6.0 | 3 | 30 | configurator |
| 5 | 5.0 | 15.0 | 58.0 | 6.0 | 3 | 30 | configurator |
| 6 | 6.0 | 16.0 | 58.0 | 6.0 | 3 | 30 | configurator |
| 8 | 8.0 | 22.0 | 70.0 | 8.0 | 3 | 30 | configurator |
| 10 | 10.0 | 25.0 | 73.0 | 10.0 | 3 | 30 | configurator |
| 12 | 12.0 | 26.0 | 84.0 | 12.0 | 3 | 30 | configurator |
| 14 | 14.0 | 26.0 | 84.0 | 14.0 | 3 | 30 | configurator |
| 16 | 16.0 | 32.0 | 93.0 | 16.0 | 3 | 30 | configurator |
| 18 | 18.0 | 32.0 | 93.0 | 18.0 | 3 | 30 | configurator |
| 20 | 20.0 | 40.0 | 104.0 | 20.0 | 3 | 30 | configurator |